Call: +91 9892523354
Low carbon steel, commonly known as mild steel, is a form of fitting made of carbon steel that has little carbon. Depending on the source, the Mild Steel Buttweld Fittings ranges will change, but they will typically be between 0.05 percent and 0.25 percent by weight. Similar to other carbon steels, mild steel is produced in the same way as pipe elbows.
The lower carbon steel grades are less pliable than mild steel, which is fairly flexible even when cold. It may therefore be easily shaped into Mild Steel Fittings in addition to having good impact and tensile strength qualities. Grades of carbon steel with a greater carbon content that are cold-worked typically fracture or crack under pressure. MS Pipe Fittings are frequently galvanized or painted with the appropriate paint in order to increase their corrosion resistance capabilities or to make them durable and rustproof.
What is Mild Steel Pipe
Fittings?
Mild steel weld fittings are more appealing to many
purchasers due to the aforementioned qualities as well as the fact that this alloy is significantly
less expensive than most steel grades. Mild steel buttweld fittings made to ANSI/ASME B16
specification are mostly used to change the direction of the flow.
This fitting is a weldable pipe that enables branching off, pipe size reduction, and attachment for auxiliary equipment. A Mild Steel 90 Degree Elbow allows for a change in flow direction by an angle of 90 degrees, similar to buttweld fittings. Mild steel threaded fittings, as its name implies, feature internal threads that provide a quick and simple connection method, particularly for pipes with tiny bore sizes or if the nominal diameter of the pipe is NPS 2 or less.
Size | Seamless Buttweld Fittings: 1/2" - 10" Welded Pipe Fittings: 1/2" - 48" |
Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
Type | DN15-DN1200 |
Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Fitting |
Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) |
Elbows | Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D,
7D-40D Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO |
Connection | Welding |
Manufacturing process | Forge, Cast, Push, Press, etc. |
Key markets and industries |
|
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Specialized manufacturer of | 90º Elbows, 45º Elbows, Tees, Crosses, Reducers, Pipe Cap, Stub End, Pipe Bend |
We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Check the schedule 40 mild steel buttweld elbow dimensions chart and price list in India.
Normal Pipe Size For (NPS) For ANSI/ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | B16.9 Buttweld Equal Tee | Buttweld 90 Deg Elbows | Buttweld 45 Deg Elbows | B16.9 Buttweld Equal Tee | Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | ASME B16.9 Buttweld Equal Tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Normal Pipe Size For (NPS) For ANSI/ ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
NPS in millimeter | A in millimeter | D in millimeter |
15 | 34 | 30 |
20 | 39 | 36 |
25 | 43 | 41 |
32 | 46 | 50 |
40 | 52 | 58 |
50 | 60 | 71 |
65 | 70 | 88 |
80 | 79 | 100 |
100 | 98 | 126 |
150 | 134 | 180 |
MILD Steel Pipe Fittings Price Per Piece | Price in INR | Price in USD | Price in UAE Dirham |
MILD STEEL ELBOW PRICE LIST | |||
MILD STEEL SEAMLESS PIPE FITTING (90 ELBOW B16.9 SMLS SIZE 3/4 SCH40) | 35 | USD $ 0.49 | UAE Dirham 1.81 |
MILD STEEL BUTT WELDING FITTINGS: 90 DEGREE ELBOW LONG RADIUS | 137 | USD $ 1.92 | UAE Dirham 7.07 |
PIPE FITTINGS MILD STEEL : 90 DEGREE ELBOW (LR), 10MM, SA420 | 99 | USD $ 1.39 | UAE Dirham 5.11 |
MILD STEEL : 90 DEGREE ELBOW (SR), SHORT RADIUS ELBOW THK 10.97MM | 154 | USD $ 2.16 | UAE Dirham 7.95 |
MILD STEEL MATERIAL B16.9 BW R=1.5D, SCH-40 | 65 | USD $ 0.91 | UAE Dirham 3.35 |
MILD STEEL 45 DEGREE ELBOW (SR), SCH 80, BLACK | 78 | USD $ 1.10 | UAE Dirham 4.02 |
MILD STEEL : LONG RADIUS 45 DEGREE ELBOW (LR), SCH 40/STD | 77 | USD $ 1.08 | UAE Dirham 3.97 |
MILD STEEL FITTING (45 ELBOW B16.9 SMLS SIZE 1.1/4 SCH40) | 35 | USD $ 0.49 | UAE Dirham 1.81 |
B16 9 MILD STEEL TEE PRICE LIST | |||
MILD STEEL EQUAL TEE, BUTTWELD, SCH. 80, SEAMLESS, ASME B16.9 | 36 | USD $ 0.47 | UAE Dirham 1.70 |
MILD STEEL EQUAL TEE, BUTTWELD, SCH. 80, SEAMLESS, ASME B16.9 | 36 | USD $ 0.47 | UAE Dirham 1.70 |
15MM B16.9 MILD STEEL BW SCH-40 REDUCING TEE PRICE | 49 | USD $ 0.69 | UAE Dirham 2.53 |
MILD STEEL BW SCH-40 UNEQUAL TEE 4” X 2” X SCH 40 | 30 | USD $ 0.49 | UAE Dirham 1.71 |
SCH-80 MILD STEEL PIPE EQUAL TEE 2" X 4 | 30 | USD $ 0.49 | UAE Dirham 1.71 |
MILD STEEL STUB END PRICE LIST | |||
PIPE FITTING MILD STEEL STUB END STD WT-FITTING BUTTWELD TYPE-LAP JOINT STUB END | 994 | USD $ 13.96 | UAE Dirham 51.29 |
MILD STEEL REDUCER PRICE LIST | |||
4 X 2 X SCH 80 X SCH 160 MILD STEEL CONCENTRIC REDUCER -FITTING BUTTWELD | 77 | USD $ 1.08 | UAE Dirham 3.97 |
PIPE FITTING - 4 X 2 X SCH 80 X SCH 160 MILD STEEL ECCENTRIC REDUCER | 62.10 | USD $ 0.941 | UAE Dirham 2.53 |
B16.9 MS MATERIAL CAP PRICE LIST | |||
BUTT WELDING PIPE FITTINGS - MILD STEEL CAP STD 2" X SCH 80 | 52.10 | USD $ 0.931 | UAE Dirham 2.43 |
LOW CARBON MILD STEEL FITTING - PIPE CAP STD 3/4" X SCH 160 | 137 | USD $ 1.92 | UAE Dirham 7.07 |
STD 11/4 X SCH 40 MILD STEEL FITTING BW END CAP | 137 | USD $ 1.92 | UAE Dirham 7.07 |
Pipe Elbow Nominal Size | Pipe Elbow Outside Diameter Y |
Wall Thickness T (Pipe Elbow Schedule) |
45 Deg. Elbow LR Centre to Face B | 90 Deg. Elbow LR Weight | 45 Deg. Elbow LR Weight |
90 Deg. Elbow LR Centre to Face A | 90 Deg. Elbow SR Weight | ||
---|---|---|---|---|---|---|---|---|---|
mm | in | mm | mm | Schedule | mm | kg | kg | mm | kg |
15 | 1/2” | 21.3 | 2.78 | STD | 15.9 | 0.08 | 0.04 | 38.1 | – |
3.73 | X.S | 15.9 | 0.10 | 0.05 | 38.1 | – | |||
20 | 3/4” | 26.7 | 2.87 | STD | 11.1 | 0.08 | 0.04 | 28.6 | – |
3.91 | X.S | 11.1 | 0.11 | 0.05 | 28.6 | – | |||
25 | 1” | 33.4 | 3.38 | STD | 22.2 | 0.15 | 0.09 | 38.1 | 0.11 |
4.55 | X.S | 22.2 | 0.19 | 0.11 | 38.1 | 0.14 | |||
32 | 11/4” | 42.2 | 3.56 | STD | 25.4 | 0.28 | 0.14 | 47.6 | 0.18 |
4.85 | X.S | 25.4 | 0.39 | 0.2 | 47.6 | 0.24 | |||
40 | 11/2” | 48.3 | 3.68 | STD | 28.6 | 0.4 | 0.2 | 57.1 | 0.26 |
5.08 | X.S | 28.6 | 0.5 | 0.25 | 57.1 | 0.35 | |||
50 | 2” | 60.3 | 3.91 | STD | 34.9 | 0.72 | 0.36 | 76.2 | 0.5 |
5.54 | X.S | 34.9 | 1.0 | 0.5 | 76.2 | 0.68 | |||
65 | 21/2” | 73.0 | 5.16 | STD | 44.4 | 1.46 | 0.73 | 95.2 | 0.95 |
7.01 | X.S | 44.4 | 1.82 | 0.91 | 95.2 | 1.27 | |||
80 | 3” | 88.9 | 5.49 | STD | 50.8 | 2.18 | 1.1 | 114.3 | 1.45 |
7.62 | X.S | 50.8 | 2.86 | 1.45 | 114.3 | 1.95 | |||
100 | 4” | 114.3 | 6.02 | STD | 63.5 | 4.2 | 2.1 | 152.4 | 2.8 |
8.56 | X.S | 63.5 | 5.7 | 2.9 | 152.4 | 3.9 | |||
125 | 5” | 141.3 | 6.65 | STD | 79.4 | 6.8 | 3.4 | 190.0 | 4.8 |
9.5 | X.S | 79.4 | 10.0 | 5.0 | 190.0 | 6.5 | |||
150 | 6” | 168.3 | 7.11 | STD | 95.2 | 10.1 | 5.1 | 229.0 | 6.8 |
10.97 | X.S | 95.2 | 15.3 | 7.7 | 229.0 | 10.2 | |||
200 | 8” | 219.1 | 8.18 | STD | 127.0 | 20.4 | 10.2 | 305.0 | 13.6 |
12.7 | X.S | 127.0 | 30.9 | 15.5 | 305.0 | 20.9 | |||
250 | 10” | 273.9 | 9.27 | STD | 159.0 | 36.1 | 18.1 | 381.0 | 24.1 |
12.7 | X.S | 159.0 | 48.8 | 24.4 | 381.0 | 32.5 | |||
300 | 12” | 323.9 | 9.52 | STD | 190.0 | 53.1 | 26.6 | 457.0 | 35.4 |
12.7 | X.S | 190.0 | 70.0 | 35.0 | 457.0 | 46.7 | |||
350 | 14” | 355.6 | 9.52 | STD | 222.0 | 68.1 | 34.1 | 533.0 | 45.4 |
12.7 | X.S | 222.0 | 90.0 | 45.0 | 533.0 | 60.0 | |||
400 | 16” | 406.4 | 9.52 | STD | 254.0 | 89.3 | 45.0 | 610.0 | 59.5 |
12.7 | X.S | 254.0 | 118.0 | 59.0 | 610.0 | 78.7 | |||
450 | 18” | 457.0 | 9.52 | STD | 286.0 | 113.0 | 56.5 | 686.0 | 75.6 |
12.7 | X.S | 286.0 | 150.0 | 75.0 | 686.0 | 100.0 | |||
500 | 20” | 508.0 | 9.52 | STD | 318.0 | 140.0 | 85.0 | 762.0 | 93.5 |
12.7 | X.S | 318.0 | 186.0 | 112.5 | 762.0 | 124.0 | |||
600 | 24” | 610.00 | 9.52 | STD | 381.0 | 203.0 | 101.5 | 914.0 | 135.0 |
12.7 | X.S | 381.0 | 269.0 | 134.5 | 914.0 | 179.0 |
Buttweld Tee and Cap Nominal Size |
Pipe Tee and Cap Wall Thickness T |
Pipe Tee and Cap Outside Diameter Y |
Buttweld Cap End to End |
Buttweld Cap Weight |
Buttweld Tee Dimensions (C and M) |
Buttweld Tee Weight |
||
---|---|---|---|---|---|---|---|---|
mm | in | mm | Schedule | mm | mm | kg | mm | mm |
15 | 1/2” | 2.78 | STD | 21.3 | 25.4 | 0.58 | ||
3.73 | X.S | 25.4 | 0.21 | |||||
20 | 3/4” | 2.87 | STD | 26.7 | 28.6 | 0.21 | ||
3.91 | X.S | 28.6 | 0.27 | |||||
25 | 1” | 3.38 | STD | 33.4 | 38.1 | 0.1 | 38.1 | 0.34 |
4.55 | X.S | 38.1 | 0.14 | 38.1 | 0.43 | |||
32 | 11/4” | 3.56 | STD | 42.2 | 38.1 | 0.14 | 47.6 | 0.64 |
4.85 | X.S | 38.1 | 0.18 | 47.6 | 0.75 | |||
40 | 11/2” | 3.68 | STD | 48.3 | 38.1 | 0.18 | 57.1 | 0.95 |
5.08 | X.S | 38.1 | 0.23 | 57.1 | 1.13 | |||
50 | 2” | 3.91 | STD | 60.3 | 38.1 | 0.27 | 63.5 | 1.45 |
5.54 | X.S | 38.1 | 0.32 | 63.5 | 1.72 | |||
65 | 21/2” | 5.16 | STD | 73.0 | 38.1 | 0.41 | 76.2 | 2.45 |
7.01 | X.S | 38.1 | 0.45 | 76.2 | 2.95 | |||
80 | 3” | 5.49 | STD | 88.9 | 50.8 | 0.64 | 85.7 | 3.45 |
7.62 | X.S | 50.8 | 0.82 | 85.7 | 4.3 | |||
100 | 4” | 6.02 | STD | 114.3 | 63.5 | 1.13 | 105.0 | 5.7 |
8.56 | X.S | 63.5 | 1.54 | 105.0 | 7.3 | |||
125 | 5” | 6.65 | STD | 141.3 | 76.2 | 1.91 | 124.0 | 9.1 |
9.5 | X.S | 76.2 | 2.59 | 124.0 | 11.8 | |||
150 | 6” | 7.11 | STD | 168.3 | 88.9 | 2.95 | 143.0 | 13.6 |
10.97 | X.S | 88.9 | 4.1 | 143.0 | 19.0 | |||
200 | 8” | 8.18 | STD | 219.1 | 101.6 | 5.0 | 178.0 | 25.0 |
12.7 | X.S | 101.6 | 7.3 | 178.0 | 33.5 | |||
250 | 10” | 9.27 | STD | 273.0 | 127.0 | 9.1 | 216.0 | 41.0 |
12.7 | X.S | 127.0 | 12.0 | 216.0 | 54.0 | |||
300 | 12” | 9.52 | STD | 323.9 | 152.4 | 13.6 | 254.0 | 57.0 |
12.7 | X.S | 152.4 | 17.0 | 254.0 | 77.0 | |||
350 | 14” | 9.52 | STD | 355.6 | 165.1 | 15.9 | 279.0 | 73.0 |
12.7 | X.S | 165.1 | 21.0 | 279.0 | 93.0 | |||
400 | 16” | 9.52 | STD | 406.4 | 178.8 | 20.0 | 305.0 | 91.0 |
12.7 | X.S | 178.8 | 26.0 | 305.0 | 120.0 | |||
450 | 18” | 9.52 | STD | 457.0 | 203.2 | 26.0 | 343.0 | 127.0 |
12.7 | X.S | 203.2 | 34.0 | 343.0 | 165.0 | |||
500 | 20” | 9.52 | STD | 508.0 | 228.6 | 33.0 | 381.0 | 227.0 |
12.7 | X.S | 228.6 | 43.0 | 381.0 | 270.0 | |||
600 | 24” | 9.52 | STD | 610.0 | 266.7 | 46.0 | 432.0 | 345.0 |
12.7 | X.S | 266.7 | 61.0 | 432.0 | 430.0 |
ASME B16.9 Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Tees, Crosses, Lap Joint Stub Ends, Caps, Reducers |
ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
MSS SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing Buttweld Pipe Fitting tees, caps, reducers |